These 8-bit flip-flops with 3-state outputs are designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops are edge-triggered D-type flip-flops. On the positive transition of the cloc.
on These 8-bit flip-flops with 3-state outputs are designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight flip-flops are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK), the Q outputs are set to the complement of the logic levels set up at the data (D) inputs. 4Q GND CLK 3 2 1 20 19 2D 4 18 8D 2Q 5 17 7D 3Q 6 16 7Q 3D 7 15 6Q 4D 8 14 6D 9 10 11 12 13 5Q 5D A buffered output-ena.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN54ABT533 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES | |
2 | SN54ABT540 |
Texas Instruments |
OCTAL BUFFERS/DRIVERS | |
3 | SN54ABT5402A |
Texas Instruments |
12-BIT LINE/MEMORY DRIVERS | |
4 | SN54ABT5403 |
Texas Instruments |
12-BIT LINE/MEMORY DRIVERS | |
5 | SN54ABT541 |
Texas Instruments |
OCTAL BUFFERS/DRIVERS | |
6 | SN54ABT543A |
Texas Instruments |
OCTAL REGISTERED TRANSCEIVERS | |
7 | SN54ABT573 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHES | |
8 | SN54ABT574 |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS | |
9 | SN54ABT125 |
Texas Instruments |
QUADRUPLE BUS BUFFER GATES | |
10 | SN54ABT126 |
Texas Instruments |
QUADRUPLE BUS BUFFER GATES | |
11 | SN54ABT162244 |
Texas Instruments |
16-BIT BUFFERS/DRIVERS | |
12 | SN54ABT162245 |
Texas Instruments |
16-Bit BUS TRANSCEIVERS |