Si9122 is a dedicated half-bridge IC ideally suited to fixed telecom applications where efficiency is required at low output voltages (e.g. <3.3 V). Designed to operate within the fixed telecom voltage range of 33−72 V and withstand 100 V, 100 ms transients, the IC is capable of controlling and driving both the low and high-side switching devices of a half b.
D 12-V to 72-V Input Voltage Range D Compatible with ETSI 300 132-2 D Integrated Half Bridge Primary Drivers (1-A Drive Capability) D Secondary Synchronous Signals With Programmable Deadtime Delay D Voltage Mode Control D Voltage Feedforward Compensation D High Voltage Pre-Regulator Operates During Start-Up D Current Sensing On Low-Side Primary Device D Frequency Foldback Eliminates Constant Current Tail D Advanced Maximum Current Control During Start-Up and Shorted Load D Low Input Voltage Detection D Programmable Soft-Start Function D Over Temperature Protection APPLICATIONS D Network Cards.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SI9120 |
Vishay Siliconix |
Universal Input Switchmode Controller | |
2 | SI9121 |
Vishay Siliconix |
High-Voltage/ Non-Isolated Buck-Boost Converter for ISDN Digital Phones | |
3 | SI9100 |
Vishay Siliconix |
3-W High-Voltage Switchmode Regulator | |
4 | SI9102 |
Vishay Siliconix |
3-W High-Voltage Switchmode Regulator | |
5 | SI9104 |
Vishay Siliconix |
High-Voltage Switchmode Regulator | |
6 | SI9105 |
Vishay Siliconix |
1-W High-Voltage Switchmode Regulator | |
7 | SI9110 |
Vishay Siliconix |
High-Voltage Switchmode Controllers | |
8 | Si9111 |
Vishay Siliconix |
High-Voltage Switchmode Controllers | |
9 | SI9112 |
Vishay Siliconix |
High-Voltage Switchmode Controller | |
10 | SI9113DB |
Vishay Siliconix |
SI9113 Demonstration Board | |
11 | Si9114 |
TEMIC |
High-Frequency Switchmode Controller | |
12 | SI9114A |
Vishay Siliconix |
High-Frequency Switchmode Controller |