The Si9114 is a BiC/DMOS current-mode pulse width modulation (PWM) controller IC for high-frequency dc/dc converters. Single-ended topologies (forward and flyback) can be implemented at frequencies up to 1 MHz. The oscillator has an internal divide-by-two that limits the duty ratio to 50%. An oscillator sync output allows converters to be synchronized in pha.
• 15- to 200-V Input Range
• Current-Mode Control
• Internal Start-Up Circuit
Description
The Si9114 is a BiC/DMOS current-mode pulse width modulation (PWM) controller IC for high-frequency dc/dc converters. Single-ended topologies (forward and flyback) can be implemented at frequencies up to 1 MHz. The oscillator has an internal divide-by-two that limits the duty ratio to 50%. An oscillator sync output allows converters to be synchronized in phase as well as in frequency, in a master/slave configuration.
The output inverter can typicallysource 500rnA and sink 700 rnA. Shoot-through current is.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SI9110 |
Vishay Siliconix |
High-Voltage Switchmode Controllers | |
2 | Si9111 |
Vishay Siliconix |
High-Voltage Switchmode Controllers | |
3 | SI9112 |
Vishay Siliconix |
High-Voltage Switchmode Controller | |
4 | SI9113DB |
Vishay Siliconix |
SI9113 Demonstration Board | |
5 | SI9114A |
Vishay Siliconix |
High-Frequency Switchmode Controller | |
6 | SI9117 |
Vishay |
High-Frequency Converter | |
7 | SI9100 |
Vishay Siliconix |
3-W High-Voltage Switchmode Regulator | |
8 | SI9102 |
Vishay Siliconix |
3-W High-Voltage Switchmode Regulator | |
9 | SI9104 |
Vishay Siliconix |
High-Voltage Switchmode Regulator | |
10 | SI9105 |
Vishay Siliconix |
1-W High-Voltage Switchmode Regulator | |
11 | SI9120 |
Vishay Siliconix |
Universal Input Switchmode Controller | |
12 | SI9121 |
Vishay Siliconix |
High-Voltage/ Non-Isolated Buck-Boost Converter for ISDN Digital Phones |