The Philips Semiconductors SCN2661 EPCI is a universal synchronous/asynchronous data communications controller chip that is an enhanced version of the SCN2651. It interfaces easily to all 8-bit and 16-bit microprocessors and may be used in a polled or interrupt driven system environment. The SCN2661 accepts programmed instructions from the microprocessor whi.
• Synchronous operation
– 5- to 8-bit characters plus parity
– Single or double SYN operation
– Internal or external character synchronization
– Transparent or non-transparent mode
– Transparent mode DLE stuffing (Tx) and detection (Rx)
– Automatic SYN or DLE-SYN insertion SYN, DLE and DLESYN stripping
– Odd, even, or no parity
– Local or remote maintenance loopback mode
– Baud rate: DC to 1Mbps (1X clock)
INDEX CORNER
4
1
26
5 PLCC
25
11 12 TOP VIEW NOTE: Pin Functions the same as 28-pin DIP. 18
19
• Asynchronous operation
– 5- to 8-bit characters plus parity
– 1, 1-1/2 or 2 stop bi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SCN2651 |
NXP |
Programmable communications interface PCI | |
2 | SCN2652 |
NXP |
(SCN2652 / SCN68652) Multi-protocol communications controller MPCC | |
3 | SCN26562 |
NXP |
Dual universal serial communications controller DUSCC | |
4 | SCN2672T |
Signetics |
Programmable Video Timing Controller | |
5 | SCN2674 |
Signetics |
Advanced Video Display Controller | |
6 | SCN2674T |
Signetics |
Advanced Video Display Controller | |
7 | SCN2681 |
Philips |
Dual asynchronous receiver/transmitter DUART | |
8 | SCN2681T |
Philips |
Dual asynchronous receiver/transmitter DUART | |
9 | SCN0080G_A |
Avant Electronics |
80-Segment Dot-matrix STN LCD Driver | |
10 | SCN0080G_B |
Avant Electronics |
80-Segment Dot-matrix STN LCD Driver | |
11 | SCN10D-20 |
SOCAY |
Surge-Arrestor Negative Temperature Coefficient Thermistor | |
12 | SCN16D-20 |
SOCAY |
Surge-Arrestor Negative Temperature Coefficient Thermistor |