The SCN2652/68652 Multi-Protocol Communications Controller (MPCC) is a monolithic n-channel MOS LSI circuit that formats, transmits and receives synchronous serial data while supporting bit-oriented or byte control protocols. The chip is TTL compatible, operates from a single +5V supply, and can interface to a processor with an 8 or 16-bit bidirectional data.
• DC to 2Mbps data rate
• Bit-oriented protocols (BOP): SDLC, ADCCP, HDLC
• Byte-control protocols (BCP): DDCMP, BISYNC (external CRC)
• Programmable operation
– 8 or 16-bit tri-state data bus
– Error control
– CRC or VRC or none
– Character length
– 1 to 8 bits for BOP or 5 to 8 bits for BCP
– SYNC or secondary station address comparison for BCP-BOP
– Idle transmission of SYNC/FLAG or MARK for BCP-BOP
APPLICATIONS
• Intelligent terminals
• Line controllers
• Network processors
• Front end communications
• Remote data concentrators
• Communication test equipment
• Computer to computer links.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SCN2651 |
NXP |
Programmable communications interface PCI | |
2 | SCN26562 |
NXP |
Dual universal serial communications controller DUSCC | |
3 | SCN2661 |
NXP |
(SCN2661 / SCN68661) Enhanced programmable communications interface EPCI | |
4 | SCN2672T |
Signetics |
Programmable Video Timing Controller | |
5 | SCN2674 |
Signetics |
Advanced Video Display Controller | |
6 | SCN2674T |
Signetics |
Advanced Video Display Controller | |
7 | SCN2681 |
Philips |
Dual asynchronous receiver/transmitter DUART | |
8 | SCN2681T |
Philips |
Dual asynchronous receiver/transmitter DUART | |
9 | SCN0080G_A |
Avant Electronics |
80-Segment Dot-matrix STN LCD Driver | |
10 | SCN0080G_B |
Avant Electronics |
80-Segment Dot-matrix STN LCD Driver | |
11 | SCN10D-20 |
SOCAY |
Surge-Arrestor Negative Temperature Coefficient Thermistor | |
12 | SCN16D-20 |
SOCAY |
Surge-Arrestor Negative Temperature Coefficient Thermistor |