SAA3004 The SAA3004 transmitter IC is designed for infrared remote control systems. It has a total of 448 commands which are divided into 7 sub-system groups with 64 commands each. The sub-system code may be selected by a press button, a slider switch or hard wired. The SAA3004 generates the pattern for driving the output stage. These patterns are pulse di.
• Flashed or modulated transmission
• 7 sub-system addresses
• Up to 64 commands per sub-system address
• High-current remote output at VDD = 6 V (−IOH = 40 mA)
• Low number of additional components
• Key release detection by toggle bits
• Very low stand−by current (< 2 µA)
• Operational current < 2 mA at 6 V supply
• Wide supply voltage range (4 to 11 V)
• Ceramic resonator controlled frequency (typ. 450 kHz)
• Encapsulation: 20-lead plastic DIL or 20-lead plastic mini-pack (SO-20) PACKAGE OUTLINES SAA3004P: 20-lead DIL; plastic (SOT146); SOT146-1; 1996 December 11. SAA3004T: 20-lead mini-pa.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SAA3006 |
Signetics |
Low Voltage Infrared Remote Control Transmitter | |
2 | SAA3007 |
NXP |
INFRARED REMOTE CONTROL TRANSMITTER | |
3 | SAA3008 |
Philips |
Infrared remote control transmitter RECS 80 low voltage | |
4 | SAA3009 |
ETC |
(SAA3009 / SAA3049) Infrared Remote Control Decoders | |
5 | SAA3010 |
Philips |
Infrared remote control transmitter RC-5 | |
6 | SAA3027 |
Philips |
INFRARED REMOTE CONTROL TRANSMITTER | |
7 | SAA3028 |
ETC |
Infrared Remote Control Transcoder | |
8 | SAA3049 |
Philips |
Infrared remote control decoder | |
9 | SAA3049 |
ETC |
(SAA3009 / SAA3049) Infrared Remote Control Decoders | |
10 | SAA3049A |
Philips |
Infrared remote control decoder | |
11 | SAA32M8 |
SpecTek |
DDR2 SDRAM | |
12 | SAA3323 |
Philips |
Drive processor for DCC systems |