Pin No 1 Symbol PDT Description Phase detector output terminal of the transmitter at PLL. If fTX > fREF or fTX is leading → the output is negative pulse If fTX < fREF or fTX is lagging → the output is positive pulse If fTX = fREF and the same phase → the output is High Impedance Compressor output terminal of compander: connected to the splatter filter amp in.
•
•
•
•
•
•
• Operating voltage range: 2.0V ~ 5.5V Typical supply current: 8.9mA at 3.6V Built-in low battery detection function ( selectable 3.45V, 3.3V, 3.0V, 2.2V, 2.1V ) Built-in speaker volume control and speaker amplifier Built-in splatter filter Support mode selection ( Active, Rx, Standby and Inactive mode ) FM Receiver — Excellent Receiver characteristics < 10.7MHz crystal filter used > Input sensitivity 0.7µ Vrms at 12dB SINAD
• Adjacent channel rejection > 55dB Spurious rejection (image of the second IF) > 60dB Intermodulation rejection > 50dB
•
— RSSI ( Linear ) and Carrier detec.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | S1T8527C |
Samsung semiconductor |
1 CHIP CLP SUBSYSTEM IC | |
2 | S1T8501 |
Samsung semiconductor |
SPEECH NETWORK WITH DIALER INTERFACE | |
3 | S1T8507C |
Samsung semiconductor |
compander - automatic gain control system | |
4 | S1T8513A |
Samsung semiconductor |
FM IF RECEIVER | |
5 | S1T8515A |
Samsung semiconductor |
FM IF RECEIVER FOR FLEX PAGER | |
6 | S1T8531 |
Samsung semiconductor |
WIDEBAND FM/FSK IF RECEIVER | |
7 | S1T8602B |
Samsung semiconductor |
LOW VOLTAGE AUDIO AMPLIFIER | |
8 | S1T8603 |
Samsung semiconductor |
UNIVERSAL SPEECH NETWORK | |
9 | S1T8825 |
Samsung semiconductor |
1.1GHZ DUAL PLL | |
10 | S1T8825B |
Samsung semiconductor |
1.3GHZ DUAL PLL | |
11 | S1T |
MEI SEMI |
Surface Mount Glass Passivated Rectifier | |
12 | S1T |
Diotec |
Standard Recovery SMD Rectifier Diodes |