Pin No 1 Symbol PDT3 Description Phase detector output terminal of the transmitter at PLL. If fTX > fREF or fTX is leading → the output is negative pulse If fTX < fREF or fTX is lagging → the output is positive Pulse if fTX = fREF and the same phase → the output is High Impedance Compressor output terminal of compander; connected to the splatter filter amp i.
•
•
•
•
•
•
• Operating voltage range: 2.0V — 5.5V Typical supply current: 13.5mA at 3.6V Built−in low battery detection function ( selectable 3.45V, 3.3V, 3.0V, 2.2V, 2.1V ) Built−in speaker amplifier Built−in splatter filter Built−in dual conversion receiver, compander and universal PLL FM Receiver — Complete dual conversion circuit — Excellent input sensitivity (0.7µVrms at 12dB SINAD)
• Compader — Easy gain control to use external component — Included ALC (Automatic Level Control) circuit — Included Mute logic
• Universal PLL — RX (TX) divided counter range: 1/16 — 1/16383 — Reference freq.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | S1T8528 |
Samsung semiconductor |
ENHANCED-1 CHIP CT0 RF IC | |
2 | S1T8501 |
Samsung semiconductor |
SPEECH NETWORK WITH DIALER INTERFACE | |
3 | S1T8507C |
Samsung semiconductor |
compander - automatic gain control system | |
4 | S1T8513A |
Samsung semiconductor |
FM IF RECEIVER | |
5 | S1T8515A |
Samsung semiconductor |
FM IF RECEIVER FOR FLEX PAGER | |
6 | S1T8531 |
Samsung semiconductor |
WIDEBAND FM/FSK IF RECEIVER | |
7 | S1T8602B |
Samsung semiconductor |
LOW VOLTAGE AUDIO AMPLIFIER | |
8 | S1T8603 |
Samsung semiconductor |
UNIVERSAL SPEECH NETWORK | |
9 | S1T8825 |
Samsung semiconductor |
1.1GHZ DUAL PLL | |
10 | S1T8825B |
Samsung semiconductor |
1.3GHZ DUAL PLL | |
11 | S1T |
MEI SEMI |
Surface Mount Glass Passivated Rectifier | |
12 | S1T |
Diotec |
Standard Recovery SMD Rectifier Diodes |