lQ QT1103 QTOUCH™ 10-KEY SENSOR IC This datasheet is applicable to all revision 3 chips DETECT SYNC/LP VSS SNS7K SNS7 SNS6K SNS6 SNS5K The QT1103 is designed for low cost appliance, mobile, and consumer electronics applications. QTouch™ technology is a type of patented charge-transfer sensing method well known for its robust, stable, EMC-resistant charac.
as the older device but differs in the following ways:
• Rs resistors on each channel eliminated
• Up to 4x more sensitive for a given value of Cs
• Shorter burst lengths, less power for a given value of Cs
• ‘Burst A and B’ only mode for up to eight keys, with less power
• ‘Burst B’ only mode for up to four keys, with less power than ‘Burst A and B’ mode
• Requires an external reset signal
The QT1103 should be used instead of the QT1101 for new designs due to a simpler circuit, lower power and lower cost.
1.2 Parameters
1.2.1 Introduction
The QT1103 is an easy to use, ten touch-key sensor IC .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | QT110 |
QUANTUM |
SENSOR ICs | |
2 | QT1100A-ISG |
QUANTUM |
10 KEY QTOUCH SENSOR IC | |
3 | QT1101 |
QUANTUM |
10 KEY QTOUCH SENSOR IC | |
4 | QT1106-ISG |
QUANTUM |
QWHEEL/QSLIDE/QTOUCH IC | |
5 | QT110H |
QUANTUM |
SENSOR ICs | |
6 | QT111 |
QUANTUM |
QT 11x Series Variations | |
7 | QT112 |
QUANTUM |
QT 11x Series Variations | |
8 | QT113 |
ETC |
CHARGE-TRANSFER TOUCH SENSOR | |
9 | QT113H |
ETC |
CHARGE-TRANSFER TOUCH SENSOR | |
10 | QT114 |
QUANTUM |
CHARGE-TRANSFER QLEVEL SENSOR IC | |
11 | QT115 |
QUANTUM |
QT 11x Series Variations | |
12 | QT117L |
QUANTUM |
Designed to Output raw Data over a Master-mode SPI Port |