www.DataSheet4U.com lQ " Patented charge-transfer (‘QT’) design " Ten independent QT sensing fields (keys) " 2.8V ~ 5.5V single supply operation " 40µA current typ @ 3V in 360ms LP mode " 100% autocal for life - no adjustments required " Serial one or two wire interface with auto baud rate " Fully debounced results " Patented AKS™ Adjacent Key Suppression ".
which provide for reliable, trouble-free operation over the life of the product. Burst operation: The device operates in ‘burst mode’. Each key is acquired using a burst of charge-transfer sensing pulses whose count varies depending on the value of the reference capacitor Cs and the load capacitance Cx. In LP mode, the device sleeps in an ultra-low current state between bursts to conserve power. The keys signals are acquired using three successive bursts of pulses: Burst A: Keys 0, 1, 4, 5 Burst B: Keys 2, 3, 6, 7 Burst C: Keys 8, 9 Bursts always operate in A-B-C sequence. Self-calibration: On.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | QT110 |
QUANTUM |
SENSOR ICs | |
2 | QT1100A-ISG |
QUANTUM |
10 KEY QTOUCH SENSOR IC | |
3 | QT1103 |
QUANTUM |
10-KEY SENSOR IC | |
4 | QT1106-ISG |
QUANTUM |
QWHEEL/QSLIDE/QTOUCH IC | |
5 | QT110H |
QUANTUM |
SENSOR ICs | |
6 | QT111 |
QUANTUM |
QT 11x Series Variations | |
7 | QT112 |
QUANTUM |
QT 11x Series Variations | |
8 | QT113 |
ETC |
CHARGE-TRANSFER TOUCH SENSOR | |
9 | QT113H |
ETC |
CHARGE-TRANSFER TOUCH SENSOR | |
10 | QT114 |
QUANTUM |
CHARGE-TRANSFER QLEVEL SENSOR IC | |
11 | QT115 |
QUANTUM |
QT 11x Series Variations | |
12 | QT117L |
QUANTUM |
Designed to Output raw Data over a Master-mode SPI Port |