PE9354 - Peregrine Semiconductor

PE9354 SPDT High Power UltraCMOS RF Switch Rad hard for Space Applications

The PE9354 SPDT High Power UltraCMOS™ RF Switch is designed to cover a broad range of applications from near DC to 3000 MHz. This single-supply reflective switch integrates onboard CMOS control logic driven by a simple, single-pin CMOS and TTL compatible control input. Using a nominal +3-volt power supply, a typical input 1 dB compression point of +31 dBm ca.

Features

• Single 3-volt power supply
• Low insertion loss: 0.55 dB at 2000 MHz
• High isolation of 30 dB at 2000 MHz
• Typical input 1 dB compression point of +31 dBm
• 100 Krad total dose
• Single-pin CMOS or TTL logic control
• Low cost Figure 2. Package Type 8-lead CSOIC RF1 RF2 CMOS Control Driver CTRL Table 1. A/C Electrical Specifications -55 °C to +125 °C, VDD = 3.0 V (ZS = ZL = 50 Ω) Parameter Operation Frequency Insertion Loss Isolation
  – RFC to RF1/RF2 Isolation
  – RF1 to RF2 Return Loss 2 1 Conditions Minimum DC Typical Maximum 3000 Units MHz dB dB dB dB dBm 2000 MHz 2000 MHz 20.