The PE9301 is a high performance monolithic UltraCMOS™ prescaler with a fixed divide ratio of 2. Its operating frequency range is 1500 MHz to 3500 MHz. The PE9301 operates on a nominal 3 V supply and draws only 13 mA. It is packaged in a small 8-lead CSOIC and is ideal for Space microwave PLL synthesis solutions. The PE9301 is manufactured on Peregrine’s Ult.
• High-frequency operation: 1500 MHz to 3500 MHz
• Fixed divide ratio of 2
• Low-power operation: 13 mA typical
@ 3 V across frequency
• Small package: 8-lead SOIC
• Low Cost
Figure 1. Functional Diagram
Figure 2. Package Type
8-lead CSOIC
D
Q QB
DRIVER OUTPUT BUFFER
OUT
IN
PREAMP
CLK
DEC
INB
DEC CLKB
OFF-CHIP BYPASS
Table 1. Electrical Specifications @ +25 °C (ZS = ZL = 50 Ω)
Parameter
Supply Voltage Supply Current Input Frequency (FIN) Input Power (PIN) Output Power PIN = -5 dBm min. FIN = 1.5 to 3.5 GHz 1.5 -5 -10
Conditions
Minimum
2.85
Typical
3.0 13
Maximum
3.15 15 3.5 +.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PE9303 |
Peregrine Semiconductor |
3.5 GHz Low Power CMOS Divide-by-8 Prescaler For RAD-Hard Applications | |
2 | PE9304 |
Peregrine Semiconductor |
1 GHz - 7 GHz Low Power UltraCMOS Divide-by-2 Prescaler Rad-hard for Space Applications | |
3 | PE9308 |
Peregrine Semiconductor |
10.0 GHz Low Power UltraCMOS | |
4 | PE9309 |
Peregrine Semiconductor |
3.0 - 13.5 GHz Low Power UltraCMOS Divide-by-4 Prescaler | |
5 | PE9311 |
Peregrine Semiconductor |
high-performance static UltraCMOS prescaler | |
6 | PE9312 |
Peregrine Semiconductor |
Divide-by-4 Prescaler Radiation Tolerant | |
7 | PE9313 |
TELEDYNE |
high-performance static UltraCMOS prescaler | |
8 | PE9313 |
Peregrine Semiconductor |
1500 MHz Low Power UltraCMOS Divide-by-8 Prescaler RAD hard | |
9 | PE9354 |
Peregrine Semiconductor |
SPDT High Power UltraCMOS RF Switch Rad hard for Space Applications | |
10 | PE90F120 |
ETC |
THYRISTOR MODULE | |
11 | PE90F120 |
SanRex Corporation |
THYRISTOR MODULE | |
12 | PE90F160 |
ETC |
THYRISTOR MODULE |