PE4306 - Peregrine Semiconductor

PE4306 RF Digital Attenuator

The PE4306 is a high linearity, 5-bit RF Digital Step Attenuator (DSA) covering a 31 dB attenuation range in 1dB steps, and is pin compatible with the PE430x series. This 50-ohm RF DSA provides both parallel (latched or direct mode) and serial CMOS control interface, operates on a single 3-volt supply and maintains high attenuation accuracy over frequency an.

Features

• Attenuation: 1 dB steps to 31 dB
• Flexible parallel and serial programming interfaces
• Latched or direct mode
• Unique power-up state selection
• Positive CMOS control logic
• High attenuation accuracy and linearity over temperature and frequency
• Very low power consumption
• Single-supply operation
• 50 Ω impedance
• Pin compatible with PE430x series
• Packaged in a 20 Lead 4x4 mm QFN Figure 2. Package Type 4x4mm -20 Lead QFN Parallel Control Serial Control Power-Up Control 5 3 Control Logic Interface 2 Table 1. Electrical Specifications @ +25°C, VDD = 3.0 V Parameter Operation Fre.