The PE4302 is a high linearity, 6-bit RF Digital Step Attenuator “DSA” covering a 31.5 dB attenuation range in 0.5 dB steps. This 50-ohm RF DSA provides both parallel and serial CMOS control interface operates on a single 3-volt supply and maintains high attenuation accuracy over frequency and temperature. It also has a unique control interface that allows t.
• Attenuation: 0.5 dB steps to 31.5 dB
• Flexible parallel and serial programming
interfaces
• Unique power-up state selection
• Positive CMOS control logic
• High attenuation accuracy and linearity
over temperature and frequency
• Very low power consumption
• Single-supply operation
• 50 Ω impedance
• Packaged in a 20 lead 4x4mm QFN
Figure 1. Functional Schematic Diagram
Switched Attenuator Array RF Input RF Output
Figure 2. Package Type
4x4mm -20 Lead QFN
Parallel Control Serial Control Power-Up Control
6
3
Control Logic Interface
2
Table 1. Electrical Specifications @ +25°C, VDD =.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PE4304 |
Peregrine Semiconductor |
RF Digital Attenuator | |
2 | PE4305 |
Peregrine Semiconductor |
RF Digital Attenuator | |
3 | PE4306 |
Peregrine Semiconductor |
RF Digital Attenuator | |
4 | PE4307 |
Peregrine Semiconductor |
RF Digital Attenuator | |
5 | PE43072 |
Peregrine Semiconductor |
RF Digital Attenuator | |
6 | PE43073 |
Peregrine Semiconductor |
RF Digital Attenuator | |
7 | PE4308 |
Peregrine Semiconductor |
RF Digital Attenuator | |
8 | PE4309 |
Peregrine Semiconductor |
RF Digital Attenuator | |
9 | PE4312 |
Peregrine Semiconductor |
RF Digital Step Attenuator | |
10 | PE4314 |
Peregrine Semiconductor |
RF Digital Step Attenuator | |
11 | PE43204 |
Peregrine Semiconductor |
RF Digital Attenuator | |
12 | PE43205 |
Peregrine Semiconductor |
UltraCMOS RF Digital Attenuator |