The PC755 and PC745 PowerPC® microprocessors are high-performance, lowpower, 32-bit implementations of the PowerPC Reduced Instruction Set Computer (RISC) architecture, especially enhanced for embedded applications. The PC755 and PC745 microprocessors differ only in that the PC755 features an enhanced, dedicated L2 cache interface with on-chip L2 tags. The P.
• 18.1SPECint95, Estimates 12.3 SPECfp95 at 400 MHz (PC755)
• 15.7SPECint95, 9SPECfp95 at 350 MHz (PC745)
• 733 MIPS at 400 MHz (PC755) at 641 MIPS at 350 MHz (PC745)
• Selectable Bus Clock (12 CPU Bus Dividers up to 10x)
• PD Typical 6.4W at 400 MHz, Full Operating Conditions
• Nap, Doze and Sleep Modes for Power Savings
• Superscalar (3 Instructions per Clock Cycle) Two Instruction + Branch
• 4 Beta Byte Virtual Memory, 4-GByte of Physical Memory
• 64-bit Data and 32-bit Address Bus Interface
• 32-KB Instruction and Data Cache
• Six Independent Execution Units
• Write-back and Write-through .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PC740 |
Picker |
PCB Relay | |
2 | PC7410 |
ATMEL Corporation |
PowerPC 7410 RISC Microprocessor | |
3 | PC7447 |
ATMEL Corporation |
(PC7447 / PC7457) PowerPC 7457 RISC Microprocessor | |
4 | PC7447A |
ATMEL Corporation |
PowerPC RISC microprocessor | |
5 | PC7457 |
ATMEL Corporation |
(PC7447 / PC7457) PowerPC 7457 RISC Microprocessor | |
6 | PC74HC30 |
NXP |
8-Input NAND Gate | |
7 | PC74HC32 |
NXP |
Quad 2-Input OR Gate | |
8 | PC74HC354 |
NXP |
8-Input Multiplexer/Register | |
9 | PC74HC356 |
NXP |
8-Input Multiplexer/Register | |
10 | PC74HC365 |
NXP |
HEX Buffer / Line Driver | |
11 | PC74HC366 |
NXP |
HEX Buffer / Line Driver | |
12 | PC74HC367 |
NXP |
HEX Buffer / Line Driver |