The PC7410 is the second microprocessor that uses the fourth (G4) full implementation of the PowerPC Reduced Instruction Set Computer (RISC) ar.
• 22.8 SPECint95 (estimated), 17SPECfp95 at 500 MHz (estimated)
• 917MIPS at 500 MHz
• Selectable Bus Clock (14 CPU Bus Dividers Up To 9x)
• Seven Selectable Core-to-L2 Frequency Divisors
• Selectable 603 Interface Voltage Below 3.3V (1.8V, 2.5V)
• Selectable L2 interface of 1.8V or 2.5V
• PD Typical 5.3W at 500 MHz, Full Operating Conditions
• Nap, Doze and Sleep Modes for Power Saving
• Superscalar (Four Instructions fetched per Clock Cycle)
• 4 GB Direct Addressing Range
• Virtual Memory: 4 hexabytes (252)
• 64-bit Data and 32-bit Address Bus Interface
• 32 KB Instruction and Data Cache
• E.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PC740 |
Picker |
PCB Relay | |
2 | PC7447 |
ATMEL Corporation |
(PC7447 / PC7457) PowerPC 7457 RISC Microprocessor | |
3 | PC7447A |
ATMEL Corporation |
PowerPC RISC microprocessor | |
4 | PC745 |
ATMEL |
32-bit RISC Microprocessor | |
5 | PC7457 |
ATMEL Corporation |
(PC7447 / PC7457) PowerPC 7457 RISC Microprocessor | |
6 | PC74HC30 |
NXP |
8-Input NAND Gate | |
7 | PC74HC32 |
NXP |
Quad 2-Input OR Gate | |
8 | PC74HC354 |
NXP |
8-Input Multiplexer/Register | |
9 | PC74HC356 |
NXP |
8-Input Multiplexer/Register | |
10 | PC74HC365 |
NXP |
HEX Buffer / Line Driver | |
11 | PC74HC366 |
NXP |
HEX Buffer / Line Driver | |
12 | PC74HC367 |
NXP |
HEX Buffer / Line Driver |