The OP290 is a high performance micropower dual op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP290 to accommodate input signals down to ground in single-supply operation. The OP290 output swing also includes ground when operating from a single .
Single-/dual-supply operation: 1.6 V to 36 V, ±0.8 V to ±18 V True single-supply operation; input and output voltage Input/output ranges include ground Low supply current (per amplifier), 20 µA maximum High output drive, 5 mA minimum Low input offset voltage, 200 µV typical High open-loop gain, 400 V/mV minimum Outstanding PSRR, 5.6 µV/V maximum Industry standard 8-Mead dual pinout
PIN CONNECTIONS
OP290
OUT A 1
–IN A 2 +IN A 3 V
– 4
AB
–+ +
–
8 V+ 7 OUT B 6
–IN B 5 +IN B
Figure 1. PDIP (P-Suffix)
00327-001
GENERAL DESCRIPTION
The OP290 is a high performance micropower dual op amp that ope.
Each device in this series, is a gallium aluminum arsenide infrared Light Emitting Diode (LED) that is molded in an IRt.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | OP291 |
Analog Devices |
Micropower Single-Supply Rail-to-Rail Input/Output Op Amps | |
2 | OP292 |
TT |
Plastic Infrared Emitting Diode | |
3 | OP292 |
Analog Devices |
DUAL/QUAD SINGLE SUPPLY OPERATIONAL AMPLIFIER | |
4 | OP293 |
Analog Devices |
Precision / Micropower Operational Amplifiers | |
5 | OP293 |
OPTEK Technologies |
(OP293 / OP298) GaAlAs Plastic Infrared Emitting Diodes | |
6 | OP293C |
TT |
Plastic Infrared Emitting Diode | |
7 | OP294 |
ETC |
GaAlAs Plastic Infrared Emitting Diode | |
8 | OP295 |
Analog Devices |
DUAL/QUAD RAIL-TO-RAIL OPERATIONAL AMPLIFIERS | |
9 | OP295C |
TT |
Plastic Infrared Emitting Diode | |
10 | OP296 |
Analog Devices |
Micropower / Rail-to-Rail Input and Output Operational Amplifiers | |
11 | OP296C |
TT |
Plastic Infrared Emitting Diode | |
12 | OP297 |
TT |
Plastic Infrared Emitting Diode |