Pin No. Micro8 1, 2 3 4 5 6 7, 8 − Pin No. QFN10 1, 2 3 4 7 8 9, 10 5, 6 Pin Name Vout SENSE GND NR SD Vin NC Description Regulated output voltage. Bypass to ground with Cout w 1.0 mF. For output voltage sensing, connect to Pins 1 and 2. Power Supply Ground Noise Reduction Pin. This is an optional pin used to further reduce noise. Shutdown pin. When not in u.
required by today’s consumer electronics. This unique device is guaranteed to be stable without a minimum load current requirement and stable with any type of capacitor as small as 1.0 mF. The NCP3335 also comes equipped with sense and noise reduction pins to increase the overall utility of the device.
Features http://onsemi.com
Micro8] DMR2 SUFFIX CASE 846A QFN10 MN SUFFIX CASE 485C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High Accuracy Over Line and Load (+0.9% at 255C) Ultra−Low Dropout Voltage at Full Load (260 mV typ.) No Minimum Output Current Required for Stability Low Noise (35 mVrms.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP333 |
ON Semiconductor |
1.5A Ultra-Small Controlled Load Switch | |
2 | NCP3334 |
ON Semiconductor |
Adjustable Low Dropout Regulator | |
3 | NCP3334A |
ON Semiconductor |
Low Dropout Regulator | |
4 | NCP3335A |
ON Semiconductor |
Low Dropout Regulator | |
5 | NCP3337 |
ON Semiconductor |
Power Good Low Dropout Regulator | |
6 | NCP330 |
ON Semiconductor |
Soft-Start Controlled Load Switch | |
7 | NCP334 |
ON Semiconductor |
2A Ultra-Small Controlled Load Switch | |
8 | NCP335 |
ON Semiconductor |
2A Ultra-Small Controlled Load Switch | |
9 | NCP336 |
ON Semiconductor |
3A Ultra-Small Controlled Load Switch | |
10 | NCP337 |
ON Semiconductor |
3A Ultra-Small Controlled Load Switch | |
11 | NCP338 |
ON Semiconductor |
2A Ultra-Small Controlled Load Switch | |
12 | NCP339 |
ON Semiconductor |
3A Ultra-Small Controlled Load Switch |