Pin Name Pin Number Type IN 1 POWER GND EN OUT 2 POWER 3 INPUT 4 OUTPUT PAD1 POWER Description Power−switch input voltage; connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC. Ground connection; Enable input, logic high turns on power switch. Power−switch output; connect a 1 mF ceramic capacitor from OUT to GND .
• 1.8 V − 5.5 V Operating Range
• 30 mW N−MOSFET
• DC Current Up to 3 A
• Peak Current Up to 5 A
• Built−in Soft−Start 2 ms
• Reverse Voltage Protection
• Active High with Integrated Bridge
• Compliance to IEC61000−4−2 (Level 4)
8.0 kV (Contact) 15 kV (Air)
• ESD Ratings: Machine Model = B
Human Body Model = 3
• mDFN4 1.2 x 1.6 mm
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
• This is a Pb−Free Device
Typical Applications
• Mobile Phones
• Tablets
• Digital Cameras
• GPS
• Computers
Vbat
1 mF
IN.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP333 |
ON Semiconductor |
1.5A Ultra-Small Controlled Load Switch | |
2 | NCP3334 |
ON Semiconductor |
Adjustable Low Dropout Regulator | |
3 | NCP3334A |
ON Semiconductor |
Low Dropout Regulator | |
4 | NCP3335 |
ON Semiconductor |
Low Dropout Regulator | |
5 | NCP3335A |
ON Semiconductor |
Low Dropout Regulator | |
6 | NCP3337 |
ON Semiconductor |
Power Good Low Dropout Regulator | |
7 | NCP334 |
ON Semiconductor |
2A Ultra-Small Controlled Load Switch | |
8 | NCP335 |
ON Semiconductor |
2A Ultra-Small Controlled Load Switch | |
9 | NCP336 |
ON Semiconductor |
3A Ultra-Small Controlled Load Switch | |
10 | NCP337 |
ON Semiconductor |
3A Ultra-Small Controlled Load Switch | |
11 | NCP338 |
ON Semiconductor |
2A Ultra-Small Controlled Load Switch | |
12 | NCP339 |
ON Semiconductor |
3A Ultra-Small Controlled Load Switch |