Pin No Pin Name 1 GND 2 FB 3 BO/OVP Function − Feedback pin Adjust the BO level Latch input 4 CS Current sense + OPP adjustment Latch input 5 Vcc 6 DRV Supplies the controller – protects the IC Driver output Pin Description The controller ground. Hooking an optocoupler collector to this pin will allow regulation. A voltage below the progra.
such as a timer−based auto−recovery short circuit protection, lossless OPP, and an easily adjustable Brown Out (BO) pin. Two inputs are provided to latch off the part in a practical way, for instance with OVP and OTP events. Several options exists to chose latch or auto−recovery for these events.
Features
• Fixed−frequency 65−kHz or 100−kHz Current−mode Control
Operation
• Adjustable Over Power Protection (OPP) Circuit, Disabled at Low
Line
• Adjustable Brown Out Level
• Frequency Foldback down to 26 kHz and Skip−cycle in Light Load
Conditions
• Internally−fixed Slope Compensation Ramp
• Inter.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP1250 |
ON Semiconductor |
Current-Mode PWM Controller | |
2 | NCP1251 |
ON Semiconductor |
Current-Mode PWM Controller | |
3 | NCP12510 |
ON Semiconductor |
Current-Mode PWM Controller | |
4 | NCP1252 |
ON Semiconductor |
PWM Controller | |
5 | NCP1253 |
ON Semiconductor |
Current-Mode PWM Controller | |
6 | NCP1254 |
ON Semiconductor |
Current-Mode PWM Controller | |
7 | NCP1255 |
ON Semiconductor |
Current-Mode PWM Controller | |
8 | NCP120 |
ON Semiconductor |
Very Low Dropout Bias Rail CMOS Voltage Regulator | |
9 | NCP1200 |
ON Semiconductor |
PWM Current-Mode Controller | |
10 | NCP1200A |
ON Semiconductor |
PWM Current-Mode Controller | |
11 | NCP1200CH |
ON Semiconductor |
PWM Controller | |
12 | NCP1200D |
ON Semiconductor |
PWM Controller |