Pin No. Symbol Function 1 VCC Powers the Internal Circuitry 2 Ramp Comp. Ramp Compensation in CCM 3 Brown−Out Brown−Out and Latchoff Input 4 FB Feedback Signal Input 5 Drain Drain Connection −− − 7 OPP Over Power Protection 8 GND The IC Ground Description This pin is connected to an external capacitor of typically 22 mF. The VCC includes .
• Built−in 700 V MOSFET with Typical RDS(on) of 5.8 W, TJ = 25°C
• Current−Mode Fixed Frequency Operation: 65 kHz and 100 kHz
• Fixed Peak Current of 800 mA
• Skip−Cycle Operation at Low Peak Currents
• Internal Current Source for Clean and Lossless Startup Sequence
• Auto−Recovery Output Short Circuit Protection with Timer−Based
Detection
• Auto−Recovery Overvoltage Protection with Auxiliary Winding
Operation
• Programmable Brown−Out Input for Low Input Voltage Detection
• Programmable Over Power Protection
• Input to Permanently Latchoff the Part
• Internal Frequency Jittering for Improved E.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP102 |
ON Semiconductor |
Low Dropout Linear Regulator Controller | |
2 | NCP1028 |
ON Semiconductor |
High-Voltage Switcher | |
3 | NCP100 |
ON Semiconductor |
Sub 1.0V Precision Adjustable Shunt Regulator | |
4 | NCP1000 |
ON Semiconductor |
Integrated Off-Line Switching Regulator | |
5 | NCP1001 |
ON Semiconductor |
Integrated Off-Line Switching Regulator | |
6 | NCP1002 |
ON Semiconductor |
Integrated Off-Line Switching Regulator | |
7 | NCP1010 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
8 | NCP1011 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
9 | NCP1012 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
10 | NCP1013 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
11 | NCP1014 |
ON Semiconductor |
Self-Supplied Monolithic Switcher | |
12 | NCP1015 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |