Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
Pin Symbol Name Description 1 EN Enable Input (Active High). Pull the EN pin below 0.8 V to disable the regulator and enter the standby mode operation. 2 GND Ground 3 FB Inverting input of the error amplifier. The output voltage is sampled by means of a resistor divider and ap‐ plied to this pin for regulation. 4 SOFT-S Programmable soft-start.
of the NCP102 are a dedicated enable input, internally compensated error amplifier and an adjustable soft-start. A minimum drive capability of ±5 mA provides fast transient response. The drive current is internally limited to protect the controller in case of an external MOSFET failure. The NCP102 is packaged in a space saving TSOP-6.
Features
•ă4.5 V to 13.5 V Supply Voltage Range
•ă0.8 V (±2%) Voltage Reference (Temperature and Process)
•ăProgrammable Regulator Output Voltage Down to 0.8 V
•ăDrive Current Capability of > ±5ĂmA
•ăMLCC and POSCAP Compatible
•ăProgrammable Soft-Start
•ăEnable A.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | NCP100 |
ON Semiconductor |
Sub 1.0V Precision Adjustable Shunt Regulator |
|
| 2 | NCP1000 |
ON Semiconductor |
Integrated Off-Line Switching Regulator |
|
| 3 | NCP1001 |
ON Semiconductor |
Integrated Off-Line Switching Regulator |
|
| 4 | NCP1002 |
ON Semiconductor |
Integrated Off-Line Switching Regulator |
|
| 5 | NCP1010 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |
|
| 6 | NCP1011 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |
|
| 7 | NCP1012 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |
|
| 8 | NCP1013 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |
|
| 9 | NCP1014 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |
|
| 10 | NCP1015 |
ON Semiconductor |
Self-Supplied Monolithic Switcher |
|
| 11 | NCP1027 |
ON Semiconductor |
High Voltage Switcher |
|
| 12 | NCP1028 |
ON Semiconductor |
High-Voltage Switcher |
|