The MT90733 DS3 Framer (DS3F) is designed for mapping broadband payloads into the DS3 frame format, which meets ANSI’s T1.107-1988 and supplement T1.107a-1990. Although the C-bit parity format is recommended, the DS3F can also operate in the M13 mode. In the C-bit parity format, the DS3F provides a separate interface for selected C-bits. The DS3F also provid.
•
•
•
•
•
•
•
•
• DS3 payload access in either bit-serial or nibble-parallel mode C-bit parity or M13 operating mode Separate interface for C-bits Detect and generate DS3 AIS, and idle signals Transmit reference generator for serial operation Transmit and receive FEAC channel under software control Transmit single errors: framing, FEBE, C-bit parity, and P-bit parity FEBE, C-bit and P-bit performance counters Transmit-to-Receive and Receive-to-Transmit loopbacks Subrate multiplexing Wideband data or video transport DS3 monitor and test Channel extenders
Line Side X1 X2 FE D3RD D3RC CRD CRCK CR.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MT90732 |
Mitel Networks Corporation |
CMOS E2/E3 Framer (E2/E3F) | |
2 | MT90710 |
Mitel Networks Corporation |
High-Speed Isochronous Multiplexer | |
3 | MT9072 |
Zarlink Semiconductor |
Octal T1/E1/J1 Framer | |
4 | MT9074 |
Mitel Networks Corporation |
T1/E1/J1 Single Chip Transceiver | |
5 | MT9074 |
Zarlink Semiconductor |
T1/E1/J1 Single Chip Transceiver | |
6 | MT9075A |
Mitel Networks Corporation |
E1 Single Chip Transceiver | |
7 | MT9075B |
Mitel Networks Corporation |
E1 Single Chip Transceiver | |
8 | MT9075B |
Zarlink Semiconductor |
E1 Single Chip Transceiver | |
9 | MT9076 |
Mitel Networks Corporation |
T1/E1/J1 3.3V Single Chip Transceiver | |
10 | MT9079 |
Mitel Networks Corporation |
CMOS ST-BUS FAMILY Advanced Controller for E1 | |
11 | MT90 |
Techsem |
Thyristor Modules | |
12 | MT900A-UR |
Marktech Corporate |
5mm Ultra Bright LED |