The MT90732 E2/E3 Framer (E2/E3F) is a CMOS VLSI device that provides the functions needed to frame a wideband payload to one of four CCITT Recommendations. G.742, G.745, G.751, or G.753. The E2/E3 Framer interfaces to line circuitry with either dual rail or NRZ signals. On the terminal side, the interface can be either nibble-parallel or bitserial. The MT90.
• Framer for CCITT Recommendations - G.742 (8448 kbit/s) - G.745 (8448 kbit/s) - G.751 (34368 kbit/s) - G.753 (34368 kbit/s) Line side interface - Dual rail or NRZ HDB3 codec for dual rail I/O Terminal side interface - Nibble-parallel - Bit-serial Transmit reference generator for bit-serial I/O Microprocessor or control leads I/O port for service bits
ISSUE 1
May 1995
Ordering Information MT90732AP 68 Pin PLCC -40°C to +85°C
Description
The MT90732 E2/E3 Framer (E2/E3F) is a CMOS VLSI device that provides the functions needed to frame a wideband payload to one of four CCITT Recommendations.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MT90733 |
Mitel Networks Corporation |
CMOS DS3 Framer (DS3F) | |
2 | MT90710 |
Mitel Networks Corporation |
High-Speed Isochronous Multiplexer | |
3 | MT9072 |
Zarlink Semiconductor |
Octal T1/E1/J1 Framer | |
4 | MT9074 |
Mitel Networks Corporation |
T1/E1/J1 Single Chip Transceiver | |
5 | MT9074 |
Zarlink Semiconductor |
T1/E1/J1 Single Chip Transceiver | |
6 | MT9075A |
Mitel Networks Corporation |
E1 Single Chip Transceiver | |
7 | MT9075B |
Mitel Networks Corporation |
E1 Single Chip Transceiver | |
8 | MT9075B |
Zarlink Semiconductor |
E1 Single Chip Transceiver | |
9 | MT9076 |
Mitel Networks Corporation |
T1/E1/J1 3.3V Single Chip Transceiver | |
10 | MT9079 |
Mitel Networks Corporation |
CMOS ST-BUS FAMILY Advanced Controller for E1 | |
11 | MT90 |
Techsem |
Thyristor Modules | |
12 | MT900A-UR |
Marktech Corporate |
5mm Ultra Bright LED |