The MCRF202 is a passive Radio Frequency Identification (RFID) device that provides an RF interface for reading the contents of a user memory array. This device is specially designed to detect the logic state of an external sensor, and alters its data transmissions, based on the condition of the sensor input. The device outputs a normal bit data stream if th.
• External sensor input
• Data polarity changes with sensor input condition
• Read-only data transmission
• 96- or 128-bits of factory programming user
memory (also supports 48- and 64-bit protocols)
• Operates up to 400 kHz carrier frequency
• Low-power operation
• Modulation options:
- ASK, FSK, PSK
• Data Encoding options:
- NRZ Direct, Differential Biphase Manchester Biphase
• Die, Wafer, PDIP or SOIC package option
• Factory programming and device serialization
Applications
• Insect control
• Industrial tagging
Reader
RF Signal
Data
External MCRF202 Sensor
Switch
Package Type
PDIP/SO.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCRF200 |
Microchip Technology |
125 kHz microID Passive RFID Device | |
2 | MCRF355 |
Microchip Technology |
13.56 MHz Passive RFID Device with Anti-Collision Feature | |
3 | MCRF360 |
Microchip Technology |
13.56 MHz Passive RFID Device with Anti-Collision Feature | |
4 | MCRF450 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
5 | MCRF451 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
6 | MCRF452 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
7 | MCRF455 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
8 | MCR004 |
Rohm |
(MCR Series) Thick Film Chip Resistors | |
9 | MCR006 |
Rohm |
Thick film chip resistors | |
10 | MCR01 |
Rohm |
(MCR Series) Thick Film Chip Resistors | |
11 | MCR02 |
OTTRON |
Ethernet Based Contactless Card R/W Terminals | |
12 | MCR03 |
Rohm |
(MCR Series) Thick Film Chip Resistors |