The MCRF200 is a passive Radio Frequency Identification (RFID) device for low-frequency applications (100 kHz-400 kHz). The device is powered by rectifying an incoming RF signal from the reader. The device requires an external LC resonant circuit to receive the incoming RF signal and to send data. The device develops a sufficient DC voltage for operation whe.
• Factory programming and memory serialization (SQTPSM)
• One-time contactless programmable (developer kit only)
• Read-only data transmission after programming
• 96 or 128 bits of One-Time Programmable (OTP) user memory (also supports 48 and 64-bit protocols)
• Typical operation frequency: 100 kHz-400 kHz
• Ultra low-power operation (5 µA @ VCC = 2V)
• Modulation options: - ASK, FSK, PSK
• Data Encoding options: - NRZ Direct, Differential Biphase, Manchester Biphase
• Die, wafer, COB, PDIP or SOIC package options
• Factory programming options
Package Type
PDIP/SOIC
VA NC I/O RESET 1 2 3 4 8 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCRF202 |
Microchip Technology |
125 kHz Passive RFID Device | |
2 | MCRF355 |
Microchip Technology |
13.56 MHz Passive RFID Device with Anti-Collision Feature | |
3 | MCRF360 |
Microchip Technology |
13.56 MHz Passive RFID Device with Anti-Collision Feature | |
4 | MCRF450 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
5 | MCRF451 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
6 | MCRF452 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
7 | MCRF455 |
Microchip Technology |
13.56 MHz Read/Write Passive RFID Device | |
8 | MCR004 |
Rohm |
(MCR Series) Thick Film Chip Resistors | |
9 | MCR006 |
Rohm |
Thick film chip resistors | |
10 | MCR01 |
Rohm |
(MCR Series) Thick Film Chip Resistors | |
11 | MCR02 |
OTTRON |
Ethernet Based Contactless Card R/W Terminals | |
12 | MCR03 |
Rohm |
(MCR Series) Thick Film Chip Resistors |