The MCP8024 is a 3-Phase Brushless DC (BLDC) power module. The MCP8024 device integrates three half-bridge drivers to drive external NMOS/NMOS transistor pairs configured to drive a 3-phase BLDC motor, a comparator, a voltage regulator to provide bias to a companion microcontroller, power monitoring comparators, an overtemperature sensor, two level translat.
• Three Half-bridge Drivers Configured to Drive External High-Side NMOS and Low-Side NMOS MOSFETs: - Independent input control for high-side NMOS and low-side NMOS MOSFETs - Peak output current: 0.5A @ 12V - Shoot-through protection - Overcurrent and short circuit protection
• Adjustable Output Buck Regulator (750 mW)
• Fixed Output Linear Regulators: - 5V @ 20 mA - 12V @ 20 mA
• Internal Bandgap Reference
• Three Operational Amplifiers for Motor Phase Current Monitoring and Position Detection
• Overcurrent Comparator
• Two Level Translators
• Operational Voltage Range 6 - 40V
• Undervoltage .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCP8021 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
2 | MCP8022 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
3 | MCP8025 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
4 | MCP8026 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
5 | MCP8063 |
Microchip |
3-Phase Brushless Sinusoidal Sensorless Motor Driver | |
6 | MCP809 |
ETCTI |
MCP809/MCP810 3-Pin Microprocessor Reset Circuits (Rev. A) | |
7 | MCP809 |
National |
3-Pin Microprocessor Reset Circuits | |
8 | MCP810 |
ETCTI |
MCP809/MCP810 3-Pin Microprocessor Reset Circuits (Rev. A) | |
9 | MCP810 |
National |
3-Pin Microprocessor Reset Circuits | |
10 | MCP87018 |
Microchip |
High-Speed N-Channel Power MOSFET | |
11 | MCP87022 |
Microchip |
High-Speed N-Channel Power MOSFET | |
12 | MCP87030 |
Microchip |
High-Speed N-Channel Power MOSFET |