The MCP8021/2 devices are 3-phase Brushless DC (BLDC) power modules containing three integrated half-bridge drivers, capable of driving three external NMOS/NMOS transistor pairs. The three half-bridge drivers are capable of delivering a peak output current of 0.5A at 12V for driving high-side and low-side NMOS MOSFET transistors. The drivers have shootthroug.
• AEC-Q100 Grade 0 Qualified
• Three Half-Bridge Drivers Configured to Drive
External High-Side NMOS and Low-Side NMOS MOSFETs: - Independent input control for high-side and
low-side NMOS MOSFET gate drives - Typical peak output current: 0.5A @ 12V - Shoot-through protection - Overcurrent and short-circuit protection
• Three Operational Amplifiers (MCP8022)
• Fixed Output Linear Regulator: - 3.3V or 5.0V @ 70 mA - True current foldback
• Supply Current: - Sleep mode: 5 µA typical - Standby mode: <330 µA (MCP8021) - Standby mode, op amps off: <330 µA
(MCP8022) - Standby mode, op amps on: <1300 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCP8021 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
2 | MCP8024 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
3 | MCP8025 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
4 | MCP8026 |
Microchip |
3-Phase Brushless DC (BLDC) Motor Gate Driver | |
5 | MCP8063 |
Microchip |
3-Phase Brushless Sinusoidal Sensorless Motor Driver | |
6 | MCP809 |
ETCTI |
MCP809/MCP810 3-Pin Microprocessor Reset Circuits (Rev. A) | |
7 | MCP809 |
National |
3-Pin Microprocessor Reset Circuits | |
8 | MCP810 |
ETCTI |
MCP809/MCP810 3-Pin Microprocessor Reset Circuits (Rev. A) | |
9 | MCP810 |
National |
3-Pin Microprocessor Reset Circuits | |
10 | MCP87018 |
Microchip |
High-Speed N-Channel Power MOSFET | |
11 | MCP87022 |
Microchip |
High-Speed N-Channel Power MOSFET | |
12 | MCP87030 |
Microchip |
High-Speed N-Channel Power MOSFET |