section. ELECTRICAL CHARACTERISTICS (V+ = V+i = 2.7 to 5.5 V, GND = GNDi, Voltages Referenced to GND, TA = – 40 to 85°C, unless otherwise stated) Symbol VIL VIH VHys VOL VOH IOL IOL IOL IOL IOH IOH IOH Iin Iin IOZ Parameter Maximum Low–Level Input Voltage (Din, CLK, ENB, REFin) Minimum High–Level Input Voltage (Din, CLK, ENB, REFin) Minimum Hysteresis Volt.
ring leading dummy bits or multiple address bits in the serial data stream. In addition, BitGrabber Plus peripherals may be cascaded with existing BitGrabber™ peripherals. Because this device is a dual synthesizer, a single steering bit is used in the serial data stream to direct the data to either side of the chip. The phase/frequency detectors have linear transfer functions (no dead zones). The current delivered by the current source/sink outputs is controllable via the serial port. Also featured are low
–power standby for either one or both loops and on
–board support of an external crystal. .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MC14522B |
Motorola |
Presettable 4-Bit Down Counters | |
2 | MC145200 |
Motorola |
2.0 GHz PLL Frequency Synthesizers | |
3 | MC145201 |
Motorola |
2.0 GHz PLL Frequency Synthesizers | |
4 | MC145202 |
Motorola |
Low-Voltage 2.0 GHz PLL Frequency Synthesizer | |
5 | MC14520B |
Motorola |
DUAL UP COUNTERS | |
6 | MC14520B |
ON Semiconductor |
Dual Up Counters | |
7 | MC14521B |
ON Semiconductor |
24-Stage Frequency Divider | |
8 | MC14521B |
Motorola |
24-Stage Frequency Divider | |
9 | MC14526B |
ON Semiconductor |
Presettable 4-Bit Down Counters | |
10 | MC14527B |
Motorola |
BCD Rate Multiplier | |
11 | MC14528B |
ON Semiconductor |
Dual Monostable Multivibrator | |
12 | MC14529B |
Motorola |
Dual 4-Channel Analog Data Selector |