Frequency control for internal oscillator, FC = open, FOSC = 10kHz typ; FC = VDD, FOSC = 200kHz typ, FC has no effect when OSC pin is driven externally Charge–pump capacitor, positive terminal Power–supply ground input CAP+ GND CAP– Charge–pump capacitor, negative terminal Output, negative voltage Shutdown VOUT SHDN OSC VDD Oscillator control input. An exter.
• Converts a 2.4V to 5.5V Input Voltage to a Corresponding Negative Output Voltage (Inverter Mode)
• Uses Only 2 Capacitors; No Inductors Required!
• High Output Current: 100mA
• Selectable Oscillator Frequency: 10kHz to 200kHz
• Power
–Saving Shutdown Input
• Optional High
–Frequency Operation Allows Use of Small Capacitors
• Low Operating Current (FC = GND): 50µA
• Tested Operating Temperature Range:
–40°C to +85°C Typical Applications
• Laptop Computers
• Medical Instruments
• Disk Drives
• µP
–Based Controllers
• Process Instrumentation
FUNCTIONAL BLOCK DIAGRAM
+ CAP+ SHDN FC OSC
– CAP
– C1
h.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MC112 |
Winsen |
Catalytic Gas Sensor | |
2 | MC112C |
Winsen |
Catalytic Gas Sensor | |
3 | MC112D |
Winsen |
Catalytic Gas Sensor | |
4 | MC1131A |
PMD |
(MC1231A / MC1131A) Advanced Brushless Motor Control Chipset | |
5 | MC1141A |
Performance Motion Devices |
(MC1141A / MC1241A) Advanced Microstepping Motion Control Chipset | |
6 | MC1151A |
PMD |
(MC1x51A) Advanced Step Motor Control Chipset | |
7 | MC117 |
ETC |
Very high stability moulded coil | |
8 | MC1001 |
Motorola |
(MC1002 / MC1003) 6 input Gates | |
9 | MC1002 |
ABOV |
6 SEGMENT x 7 GRID LED Driver | |
10 | MC100E016 |
ON Semiconductor |
8-BIT SYNCHRONOUS BINARY UP COUNTER | |
11 | MC100E016 |
Motorola |
8-Bit Synchronous Binary Up Counter | |
12 | MC100E101 |
ON Semiconductor |
QUAD 4-INPUT OR/NOR GATE |