The MAX3058/MAX3059 interface between the controller area network (CAN) protocol controller and the physical wires of the bus lines in a CAN. They are primarily intended for printer and telecom backplane applications requiring data rates up to 1Mbps. These devices provide differential transmit capability to the bus and differential receive capability to the .
four different modes of operation: high speed, slope control, standby, and shutdown. The MAX3059 features three different modes of operation: high speed, slope control, and shutdown. Highspeed mode allows data rates up to 1Mbps. In slope-control mode, the slew rate may be optimized for data rates up to 500kbps, so the effects of EMI are reduced, and unshielded twisted or parallel cable can be used. In standby mode, the transmitters are shut off and the receivers are put into low-current mode. In shutdown mode, the transmitter and receiver are switched off. The MAX3058/MAX3059 are available in .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX305 |
Maxim Integrated |
High-Speed Analog Switches | |
2 | MAX3050 |
Maxim |
Low-Supply Current CAN Transceivers | |
3 | MAX3051 |
Maxim |
Low-Supply-Current CAN Transceiver | |
4 | MAX3053 |
Maxim |
Low Supply Current CAN Transceiver | |
5 | MAX3054 |
Maxim |
Fault-Protected/Tolerant CAN Transceiver | |
6 | MAX3055 |
Maxim Integrated |
Fault-Protected/Tolerant CAN Transceiver | |
7 | MAX3056 |
Maxim Integrated |
Fault-Protected/Tolerant CAN Transceiver | |
8 | MAX3057 |
Maxim |
Low-Supply Current CAN Transceivers | |
9 | MAX3059 |
Maxim Integrated |
Low Supply Current CAN Transceivers | |
10 | MAX30001 |
Maxim Integrated |
Single-Channel Integrated Biopotential and Bioimpedance AFE | |
11 | MAX30002 |
Maxim Integrated |
Single-Channel Integrated Bioimpedance AFE | |
12 | MAX30003 |
Maxim Integrated |
Ultra-Low Power Single-Channel Integrated Biopotential |