The MAX3050 and MAX3057 interface between the CAN protocol controller and the physical wires of the bus lines in a control area network (CAN). They are primarily intended for systems requiring data rates up to 2Mbps and feature ±80V fault protection against shorts in highvoltage power buses. They provide differential transmit capability to the bus and differ.
●
● ±80V Fault Protection for 42V Systems
●
● Four Operating Modes:
• High-Speed Operation Up to 2Mbps
• Slope-Control Mode to Reduce EMI (40kbps to 500kbps)
• Standby Mode
• Low-Current Shutdown Mode
●
● AutoShutdown when Device is Inactive (MAX3050)
●
● Automatic Wake-Up from Shutdown (MAX3050)
●
● Thermal Shutdown
●
● Current Limiting
●
● Fully Compatible with the ISO 11898 Standard
Ordering Information
PART MAX3050ASA MAX3057ASA
TEMP RANGE -40°C to +125°C -40°C to +125°C
PIN-PACKAGE 8 SO 8 SO
Pin Configuration
TOP VIEW
TXD 1 GND 2
VCC 3 RXD 4
MAX3050 MAX3057
8 RS 7 CANH 6 CANL 5 SHD.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX305 |
Maxim Integrated |
High-Speed Analog Switches | |
2 | MAX3050 |
Maxim |
Low-Supply Current CAN Transceivers | |
3 | MAX3051 |
Maxim |
Low-Supply-Current CAN Transceiver | |
4 | MAX3053 |
Maxim |
Low Supply Current CAN Transceiver | |
5 | MAX3054 |
Maxim |
Fault-Protected/Tolerant CAN Transceiver | |
6 | MAX3055 |
Maxim Integrated |
Fault-Protected/Tolerant CAN Transceiver | |
7 | MAX3056 |
Maxim Integrated |
Fault-Protected/Tolerant CAN Transceiver | |
8 | MAX3058 |
Maxim Integrated |
Low Supply Current CAN Transceivers | |
9 | MAX3059 |
Maxim Integrated |
Low Supply Current CAN Transceivers | |
10 | MAX30001 |
Maxim Integrated |
Single-Channel Integrated Biopotential and Bioimpedance AFE | |
11 | MAX30002 |
Maxim Integrated |
Single-Channel Integrated Bioimpedance AFE | |
12 | MAX30003 |
Maxim Integrated |
Ultra-Low Power Single-Channel Integrated Biopotential |