The LPC804 are an ArmCortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 15 MHz. The LPC804 supports 32 KB of flash memory and 4 KB of SRAM. The peripheral complement of the LPC804 includes a CRC engine, two I2C-bus interfaces, up to two USARTs, one SPI interface, Capacitive Touch Interface (Cap Touch), one multi-rate timer, s.
System: Arm Cortex-M0+ processor (revision r0p1), running at frequencies of up to 15 MHz with single-cycle multiplier and fast single-cycle I/O port. Arm Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC). System tick timer. AHB multilayer matrix. Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported.
Memory: Up to 32 KB on-chip EEPROM based flash programming memory. Code Read Protection (CRP). 4 KB SRAM.
Dual I/O power (LPC804M111JDH24): Independent supplies on each package side permitting level-shifting s.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LPC802 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
2 | LPC810 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
3 | LPC810M021FN8 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
4 | LPC811 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
5 | LPC811M001FDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
6 | LPC811M001JDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
7 | LPC812 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
8 | LPC812M101FD20 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
9 | LPC812M101FDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
10 | LPC812M101FDH20 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
11 | LPC812M101JD20 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
12 | LPC812M101JDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller |