The LPC81xM are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC81xM support up to 16 kB of flash memory and 4 kB of SRAM. The peripheral complement of the LPC81xM includes a CRC engine, one I2C-bus interface, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self wake-up timer, and s.
System: ARM Cortex-M0+ processor, running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port. ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC). System tick timer. Serial Wire Debug (SWD) and JTAG boundary scan modes supported. Micro Trace Buffer (MTB) supported.
Memory: Up to 16 kB on-chip flash programming memory with 64 Byte page write and erase. Up to 4 kB SRAM.
ROM API support: Boot loader. USART drivers. I2C drivers. Power profiles. Flash In-Application Programming (IAP) and In-System Programming (ISP.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LPC812M101FDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
2 | LPC812M101FDH20 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
3 | LPC812M101JD20 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
4 | LPC812M101JDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
5 | LPC812M101JDH20 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
6 | LPC812M101JTB16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
7 | LPC812 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
8 | LPC810 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
9 | LPC810M021FN8 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
10 | LPC811 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
11 | LPC811M001FDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller | |
12 | LPC811M001JDH16 |
NXP |
32-bit ARM Cortex-M0+ microcontroller |