The LM27762 delivers very low-noise positive and negative outputs that are adjustable between ±1.5 V and ±5 V. Input-voltage range is from 2.7 V to 5.5 V, and output current goes up to ±250 mA. With an operating current of only 390 µA and 0.5-µA typical shutdown current, the LM27762 provides ideal performance for power amplifier and DAC bias and other high-c.
•1 Generates Low-Noise Adjustable Positive Supply Voltage Between 1.5 V and 5 V and Negative Supply Voltage Between
–1.5 V and
–5 V
• Input Voltage Range 2.7 V to 5.5 V
• ±250-mA Output Current
• Inverting Charge Pump Followed by Negative
LDO
• 2-MHz Low-Noise Fixed-Frequency Operation
• 2.5-Ω Inverter Output Impedance, VIN = 5 V
• Negative LDO Dropout Voltage 30 mV at 100 mA,
VOUT =
–5 V
• Positive LDO with 45-mV Dropout Voltage at 100
mA, VOUT = 5 V
• 390-µA Quiescent Current (Typical)
• Shutdown Quiescent Current to 0.5 µA (Typical)
• Current Limit and Thermal Protection
• Power Good Pin (A.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM2776 |
Texas Instruments |
Switched Capacitor Inverter | |
2 | LM27761 |
Texas Instruments |
Switched-Capacitor Voltage Inverter | |
3 | LM2770 |
Texas Instruments |
Step-Down DC/DC Regulator | |
4 | LM2770 |
National Semiconductor |
High Efficiency Switched Capacitor Step-Down DC/DC Regulator | |
5 | LM2771 |
Texas Instruments |
Step-Down DC/DC Converter | |
6 | LM2771 |
National Semiconductor |
Low-Ripple 250mA Switched Capacitor Step-Down DC/DC Converter | |
7 | LM2772 |
Texas Instruments |
Step-Down Regulator | |
8 | LM2772 |
National Semiconductor |
Low-Ripple Switched Capacitor Step-Down Regulator | |
9 | LM2773 |
Texas Instruments |
Step-Down Regulator | |
10 | LM2773 |
National Semiconductor |
Low-Ripple 1.8V/1.6V Spread-Spectrum Switched Capacitor Step-Down Regulator | |
11 | LM2775 |
Texas Instruments |
Switched Capacitor 5-V Boost Converter | |
12 | LM2775-Q1 |
Texas Instruments |
Switched Capacitor 5-V Boost Converter |