The LM2776 CMOS charge-pump voltage converter inverts a positive voltage in the range from 2.7 V to 5.5 V to the corresponding negative voltage. The LM2776 uses three low-cost capacitors to provide 200 mA of output current without the cost, size, and electromagnetic interference (EMI) related to inductor-based converters. With an operating current of only 10.
•1 Input Voltage: 2.7 V to 5.5 V
• 200-mA Output Current
• Inverts Input Supply Voltage
• Low-Current PFM Mode Operation
• 2-MHz Switching Frequency
• Greater than 90% Efficiency
• Current Limit and Thermal Protection
• No Inductors
2 Applications
• Operational Amplifier Power Supplies
• Interface Power Supplies
• Data Converter Supplies
• Audio Amplifier Power Supplies
• Portable Electronic Devices
2.7 V to 5.5 V 2.2 PF
Typical Application
LM2776 VIN VOUT
-VIN @ up to 200mA
EN C1+
2.2 PF
GND
C1-
1 PF
3 Description
The LM2776 CMOS charge-pump voltage converter inverts a positive volt.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LM2770 |
Texas Instruments |
Step-Down DC/DC Regulator | |
2 | LM2770 |
National Semiconductor |
High Efficiency Switched Capacitor Step-Down DC/DC Regulator | |
3 | LM2771 |
Texas Instruments |
Step-Down DC/DC Converter | |
4 | LM2771 |
National Semiconductor |
Low-Ripple 250mA Switched Capacitor Step-Down DC/DC Converter | |
5 | LM2772 |
Texas Instruments |
Step-Down Regulator | |
6 | LM2772 |
National Semiconductor |
Low-Ripple Switched Capacitor Step-Down Regulator | |
7 | LM2773 |
Texas Instruments |
Step-Down Regulator | |
8 | LM2773 |
National Semiconductor |
Low-Ripple 1.8V/1.6V Spread-Spectrum Switched Capacitor Step-Down Regulator | |
9 | LM2775 |
Texas Instruments |
Switched Capacitor 5-V Boost Converter | |
10 | LM2775-Q1 |
Texas Instruments |
Switched Capacitor 5-V Boost Converter | |
11 | LM27761 |
Texas Instruments |
Switched-Capacitor Voltage Inverter | |
12 | LM27762 |
Texas Instruments |
Low-Noise Positive and Negative Output Integrated Charge Pump Plus LDO |