Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The LEO3910 is a positive adjustable voltage regulator housed into a Power-SO 20L slug-down package, which is able to provide in regulation a maximum output current Rup to 2 A. It can operate over a large temperature range of -40 °C to +125 °C. The LEO3910 is compliant with the ST-LEO-specification, dedicated specifications for Dspace-ready rad-hard plastic .
• Operating input voltage from 3 V to 12 V
• Adjustable output voltage from 1.23 V to 9 V
• Low-dropout voltage: 0.35 V @ IO = 400 mA
• Overtemperature protection
• Overcurrent protection
• Adjustable current limitation
• Inhibit (ON/OFF) TTL-compatible control
• Gold bonding
• Nickel/palladium/gold-lead-finished (NiPdAu), whisker-free
• RML <1% and CVCM <0.1% guaranteed outgassing
• 50 krad(Si) total ionizing dose
• SEL free up to 62.5 MeV.cm²/mg
T
• Compliant with ST-LEO-specification
Application
F
• Low earth orbit (LEO) applications A Description
The LEO3910 is a positive adjustable voltag.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | LEOAC00 |
STMicroelectronics |
Rad-hard plastic quad 2-input NAND gate |
|
| 2 | LEOAC08 |
STMicroelectronics |
Rad-hard plastic Quad two-input AND gate |
|
| 3 | LEOAC14 |
STMicroelectronics |
Rad-hard plastic Hex inverter |
|
| 4 | LEOAC244 |
STMicroelectronics |
Rad-hard plastic octal bus buffer |
|
| 5 | LEOAC32 |
STMicroelectronics |
Rad-hard plastic quad two-input OR gate |
|
| 6 | LEOAC74 |
STMicroelectronics |
Dual D-type positive edge-triggered flip-flop |
|
| 7 | LEOAD128 |
STMicroelectronics |
1-Msps 12-bit ADC |
|
| 8 | LEOLVDSRD |
STMicroelectronics |
Rad-hard plastic LVDS driver-receiver |
|
| 9 | LE-MM103 |
Sure Electronics |
8x8 Dot-Matrix 3mm dia. Bicolor LED Display |
|
| 10 | LE00AB |
STMicroelectronics |
ERY LOW DROP VOLTAGE REGULATORS |
|
| 11 | LE00C |
STMicroelectronics |
ERY LOW DROP VOLTAGE REGULATORS |
|
| 12 | LE120 |
STMicroelectronics |
ERY LOW DROP VOLTAGE REGULATORS |
|