of External Components C1, C4 C2 C3 C5 Input capacitors Decoupling capacitor (ripple filter) Amplifier on time setting capacitor Power supply capacitor 2.2F is recommended. fL can be varied by C1, C4 capacitances to adjust the bass range. Approximately 0.8 second for 33F. Since the on time is proportional to this capacitance, it can be set as desired by.
on-chip protectors and standby switch.
Features
High power : supports total output of 30W 30W (VCC = 13.2V, THD = 30%, RL = 4)
Supports RL = 2 (PO = 30W when VCC = 13.2V, THD = 10%)
Designed for excellent sound quality (fL 10Hz, fH = 130kHz)
NF capacitor-less
Any on time settable by external capacitor
Less pop noise
Standby switch circuit on chip (microprocessor supported)
Various protectors on chip (output-to-ground short/output-to-VCC short/load short/overvoltage/thermal shutdown circuit)
Specifications
Maximum Ratings at Ta = 25C
Parameter
Symbol
Conditions
Max.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LA4708 |
Sanyo |
20 W 2-channel BTL AF Power Amplifier | |
2 | LA4700N |
Sanyo |
2-Channel 12W AF Power Amplifier | |
3 | LA4705 |
Sanyo |
15 W 2-channel BTL AF Power Amplifier | |
4 | LA47202P |
Sanyo Semicon Device |
Monolithic Linear IC Four-Channel BTL Power Amplifier | |
5 | LA4725 |
ON Semiconductor |
2-channel 30W BTL Audio Amplifier | |
6 | LA4725 |
Sanyo |
2-Channel BTL Power Amplifier | |
7 | LA4728 |
Sanyo |
2-Channel BTL Power Amplifier | |
8 | LA4741 |
Sanyo |
42W 4-Channel BTL Power Amplifier | |
9 | LA4742 |
Sanyo |
45 W Four-Channel Bridge Circuit Power Amplifier | |
10 | LA4743A |
Sanyo |
45 W Four-Channel (Bridge Circuit) Power Amplifier | |
11 | LA4743B |
Sanyo |
45 W Four-Channel (Bridge Circuit) Power Amplifier | |
12 | LA47501 |
Sanyo |
BTL 4ch (50W x 4) Power IC |