of External Components C1, C4 C2 C3 Input capacitors Decoupling capacitor (ripple filter) Amplifier on time setting capacitor Power supply capacitor Oscillation blocking capacitors Use polyester film capacitors (Mylar capacitors) with good temperature characteristics. (R2, R3, R4, and R5 used jointly.) Since stability may be affected slightly by the pattern .
on-chip protectors and standby switch. The LA4708 is also pin-compatible with the LA4705NA (car stereo-use 17 W two-channel power IC), and can be substituted for the LA4705NA for higher power. (When the board is shared, pins 1 and 9 must be left open.) Package Dimensions unit: mm 3109-SIP18H [LA4708] Features . High power: supports total output of 30 W + 30 W = 13.2 V, THD = 30%, R = 4 Ω) . (V Supports R = 2 Ω (P = 30 W when V = 13.2 V, THD = 10%) . Designed for excellent sound quality (f < 10 Hz, f = 130 kHz) . NF capacitorless . Any on time settable by external capacitor . Less pop noise.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | LA4700N |
Sanyo |
2-Channel 12W AF Power Amplifier | |
2 | LA4705 |
Sanyo |
15 W 2-channel BTL AF Power Amplifier | |
3 | LA4708N |
ON Semiconductor |
20W 2-channel BTL AF Power Amplifier | |
4 | LA47202P |
Sanyo Semicon Device |
Monolithic Linear IC Four-Channel BTL Power Amplifier | |
5 | LA4725 |
ON Semiconductor |
2-channel 30W BTL Audio Amplifier | |
6 | LA4725 |
Sanyo |
2-Channel BTL Power Amplifier | |
7 | LA4728 |
Sanyo |
2-Channel BTL Power Amplifier | |
8 | LA4741 |
Sanyo |
42W 4-Channel BTL Power Amplifier | |
9 | LA4742 |
Sanyo |
45 W Four-Channel Bridge Circuit Power Amplifier | |
10 | LA4743A |
Sanyo |
45 W Four-Channel (Bridge Circuit) Power Amplifier | |
11 | LA4743B |
Sanyo |
45 W Four-Channel (Bridge Circuit) Power Amplifier | |
12 | LA47501 |
Sanyo |
BTL 4ch (50W x 4) Power IC |