JW®1551 is an active clamp flyback controller for offline flyback converter applications. The JW1551 can be adopted to reduce switching loss and provide high efficiency in whole load range. JW1551 provide two control outputs, the main power switch control and the active clamp switch control. JW1551 also has X-cap discharge function to discharge the X-cap whe.
Boundary Mode Operation at Heavy Load
DCM Operation at Light Load
Burst Mode Control
Built-in Soft-start Function
X-cap Discharge Function
Include a Boost Converter, Allow Vin Range
2.5-38V
Maximum Frequency Setting with a Single
External Resistor
Adjustable Line Compensation
High Switching Frequency up to 1.5MHz
Reliable Fault Protections: VIN OVP/UVP,
VS OVP/UVP, SCP, Brown-In/Out, OTP, CS Open and Short Protection
QFN4X4-20 Package
APPLICATIONS
Adaptor
TYPICAL APPLICATION
T1
SR C ontr olle r
VBUS
OTP RT RFM EN
COMP
GAC
HV
GON
JW1551
VDD
VS CS
VIN BST VCC G.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | JW1501A |
JoulWatt |
Multi-Mode Primary-Side Regulation | |
2 | JW1501B |
JoulWatt |
Multi-Mode Primary-Side Regulation | |
3 | JW15158B |
JoulWatt |
Offline QR Gan Flyback Converter | |
4 | JW15310 |
JoulWatt |
BUCK CC/CV Controller | |
5 | JW1566A |
JoulWatt |
Offline QR GaN Flyback Converter | |
6 | JW1210 |
JoulWatt |
Scalable Adaptive 100/120Hz Current Ripple Remover | |
7 | JW1220 |
JoulWatt |
Controller for Adaptive 100/120Hz Current Ripple Removing Circuit | |
8 | JW1221 |
JoulWatt |
Controller for Adaptive 100/120Hz Current Ripple Removing Circuit | |
9 | JW1232 |
JoulWatt |
Adaptive 100/120Hz Current Ripple Remover | |
10 | JW1233 |
JoulWatt |
Adaptive 100/120Hz Current Ripple Remover | |
11 | JW1236B |
ETC |
Full color LED control chip | |
12 | JW1237 |
JoulWatt |
Adaptive 100/120Hz Current Ripple Remover |