JW1210 is used to drive a LED string (<60V), and remove the 100/120Hz current ripple on AC/DC power by a capacitor between VC and GND. JW1210 allows user to setup the maximum voltage on LED pin by connect a resistor between VLMT and GND. If the voltage on LED pin exceeds limit threshold, the current ripple remover is disabled and remain the LED voltage, whi.
Scalable Adaptive 100/120Hz Current Ripple Remover 5V~60V Input Voltage Built-in LED Driving MOSFET LED Voltage Low to 0.65V @ 0.25A Programmable LED Current Ripple Programmable maximum LED Voltage Over thermal protection eSOP8 and TO220-5L package APPLICATIONS LED Lighting DESCRIPTION JW1210 is used to drive a LED string (<60V), and remove the 100/120Hz current ripple on AC/DC power by a capacitor between VC and GND. JW1210 allows user to setup the maximum voltage on LED pin by connect a resistor between VLMT and GND. If the voltage on LED pin exceeds limit threshold, the current ripple remo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | JW1220 |
JoulWatt |
Controller for Adaptive 100/120Hz Current Ripple Removing Circuit | |
2 | JW1221 |
JoulWatt |
Controller for Adaptive 100/120Hz Current Ripple Removing Circuit | |
3 | JW1232 |
JoulWatt |
Adaptive 100/120Hz Current Ripple Remover | |
4 | JW1233 |
JoulWatt |
Adaptive 100/120Hz Current Ripple Remover | |
5 | JW1236B |
ETC |
Full color LED control chip | |
6 | JW1237 |
JoulWatt |
Adaptive 100/120Hz Current Ripple Remover | |
7 | JW1501A |
JoulWatt |
Multi-Mode Primary-Side Regulation | |
8 | JW1501B |
JoulWatt |
Multi-Mode Primary-Side Regulation | |
9 | JW15158B |
JoulWatt |
Offline QR Gan Flyback Converter | |
10 | JW15310 |
JoulWatt |
BUCK CC/CV Controller | |
11 | JW1551 |
JoulWatt |
Active Clamp Flyback Controller | |
12 | JW1566A |
JoulWatt |
Offline QR GaN Flyback Converter |