TECHNICAL DATA IW4541B Programmable Timer High-Performance Silicon-Gate CMOS The IW4541B programmable timer consists of a 16-stage binary counter, an oscillator that is controlled by external R-C components (2 resistors and a capacitor), an automatic power-on reset circuit, and output control logic. The counter increments on positive-edge clock transitons .
tate after 2N-1 counts and IW4541BD SOIC remains in that state until another MASTER RESET pulse is applied or TA = -55° to 125° C for all packages the MODE input is set to a logic “1”. Timing is initialized by setting the AUTO RESET input (pin 5) to logic “0”and turning power on. If pin 5 is set to logic “1”, the AUTO RESET circuit is disabled and counting will not start untill after a positive MASTER RESET pulse is applied and returns to a low level. The AUTO RESET consumes an appreciable amount of power and should not be used if low-power operation is desired. For reliable automatic power-on.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | IW4502B |
IK Semiconductor |
Hex Inverter/Buffer | |
2 | IW4503B |
IK Semiconductor |
Hex Buffer | |
3 | IW4511B |
IK Semiconductor |
BCD-to-7-Segment Latch Decoder/Driver | |
4 | IW4516B |
IK Semiconductor |
Presettable Binary Up/Down Counter | |
5 | IW4518B |
IK Semiconductor |
Dual BCD Up Counter | |
6 | IW4520B |
IK Semiconductor |
Dual Binary Up Counter | |
7 | IW4528B |
IK Semiconductor |
Dual Monostable Multivibrator | |
8 | IW4001B |
IK Semiconductor |
Quad 2-Input NOR Gate | |
9 | IW4002B |
IK Semiconductor |
Dual 4-Input NOR Gate | |
10 | IW4006B |
IK Semiconductor |
18-Bit Static Shift Register | |
11 | IW4011B |
IK Semiconductor |
Quad 2-Input NAND Gate | |
12 | IW4012B |
IK Semiconductor |
Dual 4-Input NAND Gate |