IP101A LF is an IEEE 802.3/802.3u compliant single-port Fast Ethernet Transceiver for both 100Mbps and 10Mbps operations. It supports Auto MDI/MDIX function to simplify the network installation and reduce the system maintenance cost. To improve the system performance, IP101A LF provides a hardware interrupt pin to indicate the link, speed and duplex status c.
10/100Mbps TX Full-duplex or half-duplex Supports Auto MDI/MDIX function Fully compliant with IEEE 802.3/802.3u Supports IEEE 802.3u auto-negotiation Supports MII / RMII / SNI interface IEEE 802.3 full duplex control specification Supports Automatic Power Saving mode Supports BaseLine Wander (BLW) compensation Supports Interrupt function Supports repeater mode Single 3.3V power supply with built-in 2.5V regulator DSP-based PHY Transceiver technology Using either 25MHz crystal/oscillator or 50MHz oscillator REF_CLK as clock source Flexible LED display for speed, duplex, link, activity and colli.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | IP101A |
IC Plus |
Single port 10/100 Fast Ethernet Transceiver | |
2 | IP101G |
IC Plus |
Fast Ethernet Transceiver | |
3 | IP101GA |
IC Plus |
Fast Ethernet Transceiver | |
4 | IP101GR |
IC Plus |
Fast Ethernet Transceiver | |
5 | IP101GRI |
IC Plus |
Fast Ethernet Transceiver | |
6 | IP101LF |
IC Plus |
Single port 10/100 Fast Ethernet Transceiver | |
7 | IP1000ALF |
IC Plus |
Gigabit Ethernet NIC Single Chip | |
8 | IP1001 |
International Rectifier |
Full Function Synchronous Buck Power Block | |
9 | IP1001LF |
IC Plus |
Integrated 10/100/1000 Gigabit Ethernet Transceiver | |
10 | IP100ALF |
IC Plus |
Integrated 10/100 Ethernet MAC PHY | |
11 | IP103H |
Interpion semiconductor |
Voltage and Current Controller | |
12 | IP1060A |
Seme LAB |
SWITCHED MODE POWER SUPPLY CONTROL CIRCUIT |