The iP1001 is a fully optimized solution for high current synchronous buck applications requiring up to 20A. The iP1001 is optimized for single-phase applications, and includes a full function fast transient response PWM control, with an optimized power semiconductor chip-set and associated passives, achieving benchmark power density. Very few external compo.
•
•
•
•
•
•
•
•
•
• 3.3V to 12V input voltage1 20A maximum load capability, with no derating up to TPCB = 90°C 5 bit DAC settable, 0.925V to 2V output voltage range 2 Configurable down to 3.3Vin & up to 3.3Vout with simple external circuit 3 200kHz or 300kHz nominal switching frequency Optimized for very low power losses Over & undervoltage protection Adjustable lossless current limit Internal features minimize layout sensitivity
* Very small outline 14mm x 14mm x 3mm
iP1001 Power Block
Description The iP1001 is a fully optimized solution for high current synchronous buck applications requir.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | IP1000ALF |
IC Plus |
Gigabit Ethernet NIC Single Chip | |
2 | IP1001LF |
IC Plus |
Integrated 10/100/1000 Gigabit Ethernet Transceiver | |
3 | IP100ALF |
IC Plus |
Integrated 10/100 Ethernet MAC PHY | |
4 | IP101A |
IC Plus |
Single port 10/100 Fast Ethernet Transceiver | |
5 | IP101ALF |
IC Plus |
Single port 10/100 Fast Ethernet Transceiver | |
6 | IP101G |
IC Plus |
Fast Ethernet Transceiver | |
7 | IP101GA |
IC Plus |
Fast Ethernet Transceiver | |
8 | IP101GR |
IC Plus |
Fast Ethernet Transceiver | |
9 | IP101GRI |
IC Plus |
Fast Ethernet Transceiver | |
10 | IP101LF |
IC Plus |
Single port 10/100 Fast Ethernet Transceiver | |
11 | IP103H |
Interpion semiconductor |
Voltage and Current Controller | |
12 | IP1060A |
Seme LAB |
SWITCHED MODE POWER SUPPLY CONTROL CIRCUIT |