The HIP1090 is a Protected Power Interface Switch designed to suppress potentially damaging over-voltage transients with peak voltage source inputs ranging up to ±90V in amplitude. It is designed to be operated in a ‘hardwired’ pass-thru mode or as a high side power switch which controls the current flow through a PNP pass transistor of the IC. In either mode.
•
•
•
• ±90V Transient Suppression 4V to 16V Operating Voltage 1A Current Load Capability Low Input-Output Voltage Drop With Controlled Saturation Detector for - Fast Low Current Turn-OFF - Reduced No-Load Idle Current Over-Voltage Shutdown Protection Short Circuit Current Limiting Over-Temperature Limiting Protected Thermal Limiting at TJ = +150oC
•
•
•
•
• -40oC to +125oC Operating Temperature Range
Applications
•
•
•
• Electronic Circuit Breaker Transient Suppressor Over-Voltage Monitor High Side Driver Switch for - Relays - Solenoids - Heaters - Motors - Lamps
Ordering Information
PART.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HIP1011 |
Renesas |
PCI Hot Plug Controller | |
2 | HIP1011A |
Renesas |
PCI Hot Plug Controller | |
3 | HIP1011B |
Renesas |
PCI Hot Plug Controller | |
4 | HIP1011D |
Renesas |
Dual Slot PCI Hot Plug Controller | |
5 | HIP1011E |
Renesas |
Dual Slot PCI Hot Plug Controller | |
6 | HIP1012A |
Renesas |
Dual Power Distribution Controller | |
7 | HIP1013 |
Renesas |
Low Cost Dual Power Distribution Controller | |
8 | HIP1015 |
Renesas |
Power Distribution Controller | |
9 | HIP1016 |
Renesas |
Power Distribution Controller | |
10 | HIP1020 |
Renesas |
Hot Plug Controller | |
11 | HIP1030 |
Intersil Corporation |
1A High Side Driver with Overload Protection | |
12 | HIP1031 |
Intersil Corporation |
Half Amp High Side Driver with Overload Protection |