PIN # SYMBOL FUNCTION DESCRIPTION 1 3V/12VS 3.3 V/12V Source Connect to source of associated external N-Channel MOSFET switch to sense output voltage. 2 3V/12VG 3.3V/12V Gate Connect to the gate of associated N-Channel MOSFET switch. A capacitor from this node to ground sets the turn-on ramp. At turn-on this capacitor will be charged to 17.4V by a 10.
• HOT SWAP Dual Power Distribution Control for +5V and +12V or +5V and +3.3V
• Provides Fault Isolation
• Programmable Current Regulation Level
• Programmable Time Out
• Charge Pump Allows the Use of N-Channel MOSFETs
• Power Good and Overcurrent Latch Indicators
• Enhanced Overcurrent Sensitivity Available
• Redundant Power On Controls
• Adjustable Turn-On Ramp
• Protection During Turn-On
• Two Levels of Current Limit Detection Provide Fast
Response to Varying Fault Conditions
• Less Than 1s Response Time to Dead Short
• 3s Response Time to 200% Current Overshoot
• Pb-Free Package Option
• .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | HIP1011 |
Renesas |
PCI Hot Plug Controller | |
2 | HIP1011A |
Renesas |
PCI Hot Plug Controller | |
3 | HIP1011B |
Renesas |
PCI Hot Plug Controller | |
4 | HIP1011D |
Renesas |
Dual Slot PCI Hot Plug Controller | |
5 | HIP1011E |
Renesas |
Dual Slot PCI Hot Plug Controller | |
6 | HIP1013 |
Renesas |
Low Cost Dual Power Distribution Controller | |
7 | HIP1015 |
Renesas |
Power Distribution Controller | |
8 | HIP1016 |
Renesas |
Power Distribution Controller | |
9 | HIP1020 |
Renesas |
Hot Plug Controller | |
10 | HIP1030 |
Intersil Corporation |
1A High Side Driver with Overload Protection | |
11 | HIP1031 |
Intersil Corporation |
Half Amp High Side Driver with Overload Protection | |
12 | HIP1090 |
Intersil Corporation |
Protected High Side Power Switch with Transient Suppression |