The GS9028 is a second generation bipolar integrated circuit designed to drive two 75Ω co-axial cables. The GS9028 features two complementary outputs whose amplitude is controlled within ± 7%. The output signal levels are also adjustable from as low as 50mV to as high as 1000mV with little change in oth.
• SMPTE 259M compliant
• Two complementary outputs, adjustable from 50 to
1000mVp-p into 75Ω loads
• Operational from DC to 622Mb/s
• Nominal 470ps rise and fall times
• < ±7% output amplitude control
• 45% system power reduction over the GS9008
• No external pulldown resistors required
• Input hysteresis
• Operational down to 80mV input amplitude
• Operates from a single +5 or -5 volt supply
• 8-pin SOIC
• Pb-free and Green
Applications
• 4ƒsc, 4:2:2, and 4:4:4:4 serial digital video interfaces from 143Mb/s to 540Mb/s; general purpose high-speed cable driver applications.
Description
The GS9.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | GS9020 |
Globaltech |
2A Sink/Source Bus Termination Regulator | |
2 | GS9020A |
GENNUM |
Serial Digital Video Input Processor | |
3 | GS9022 |
Gennum |
Digital Video Serializer | |
4 | GS9023 |
GENNUM |
Embedded Audio CODEC | |
5 | GS9024 |
Gennum |
Automatic Cable Equalizer | |
6 | GS9025A |
GENNUM |
Serial Digital Receiver | |
7 | GS9029 |
Gennum |
Serial Digital Video Cable Driver | |
8 | GS9000 |
Gennum |
Serial Digital Decoder | |
9 | GS9000C |
Gennum |
Serial Digital Decoder | |
10 | GS9000D |
Gennum |
Serial Digital Decoder | |
11 | GS9001 |
Gennum |
EDH Coprocessor | |
12 | GS9007 |
Gennum |
Quad Serial Digital Cable Driver |