The GS9025A provides automatic cable equalization and high performance clock and data recovery for serial digital signals. The GS9025A receives either single-ended or differential serial digital data and outputs differential clock and retimed data signals at PECL levels (800mV). The onboard cable equalizer provides up to 40dB of gain at 200MHz which typicall.
• SMPTE 259M compliant
• operational to 540Mb/s
• automatic cable equalization (typically greater than
350m of high quality cable at 270Mb/s)
• adjustment-free operation
• auto-rate selection (5 rates) with manual override
• single external VCO resistor for operation with five
input data rates
• data rate indication output
• serial data outputs muted and serial clock remains
active when input data is lost
• operation independent of SAV/EAV sync signals
• signal strength indicator output
• carrier detect with programmable threshold level
• power savings mode (output serial clock disable)
• Pb-f.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | GS9020 |
Globaltech |
2A Sink/Source Bus Termination Regulator | |
2 | GS9020A |
GENNUM |
Serial Digital Video Input Processor | |
3 | GS9022 |
Gennum |
Digital Video Serializer | |
4 | GS9023 |
GENNUM |
Embedded Audio CODEC | |
5 | GS9024 |
Gennum |
Automatic Cable Equalizer | |
6 | GS9028 |
Gennum |
Cable Driver | |
7 | GS9029 |
Gennum |
Serial Digital Video Cable Driver | |
8 | GS9000 |
Gennum |
Serial Digital Decoder | |
9 | GS9000C |
Gennum |
Serial Digital Decoder | |
10 | GS9000D |
Gennum |
Serial Digital Decoder | |
11 | GS9001 |
Gennum |
EDH Coprocessor | |
12 | GS9007 |
Gennum |
Quad Serial Digital Cable Driver |