Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The FMA246 is a 3-stage, reactively matched pHEMT high-gain MMIC amplifier designed for use over the 8 to 14 GHz bandwidth. The supply voltage can be varied from +3V to +6V if needed. Operating current can be adjusted using the source resistor ladders located along the bottom edge, by bonding a particular pad to ground. The amplifier is unconditionally stab.
•
•
•
•
•
•
• 8.0
– 14.0 GHz Operating Bandwidth 2.5 dB Noise Figure 30 dB Small-Signal Gain 19 dm Output Power +6V Single Bias Supply Adjustable Operating Current DC De-coupled Input and Output Ports
Preliminary Datasheet v3.0
LAYOUT:
www.DataSheet4U.com
GENERAL DESCRIPTION:
The FMA246 is a 3-stage, reactively matched pHEMT high-gain MMIC amplifier designed for use over the 8 to 14 GHz bandwidth. The supply voltage can be varied from +3V to +6V if needed. Operating current can be adjusted using the source resistor ladders located along the bottom edge, by bonding a particular pad to groun.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | FMA2 |
Rohm |
Emitter common |
|
| 2 | FMA219 |
Filtronic Compound Semiconductors |
X-BAND LNA MMIC |
|
| 3 | FMA2A |
Rohm |
Dual Digital Transistors |
|
| 4 | FMA1 |
Rohm |
General purpose (dual digital transistors) |
|
| 5 | FMA10A |
Rohm |
General purpose (dual digital transistors) |
|
| 6 | FMA1125DC |
Fujitsu |
Touch Sensor Controller |
|
| 7 | FMA11A |
Rohm |
Emitter common (dual digital transistors) |
|
| 8 | FMA1A |
Rohm |
General purpose (dual digital transistors) |
|
| 9 | FMA3007 |
Filtronic Compound Semiconductors |
2-20GHZ BROADBAND MMIC AMPLIFIER |
|
| 10 | FMA3008 |
Filtronic |
BROADBAND MMIC AMPLIFIER |
|
| 11 | FMA3009 |
Filtronic |
BROADBAND MMIC AMPLIFIER |
|
| 12 | FMA3011 |
Filtronic |
MMIC POWER AMPLIFIER |
|