Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
The FMA219 is a 2-stage, reactively matched pHEMT low-noise MMIC amplifier designed for use over 7.0 to 11.0 GHz. The amplifier requires a single +3V supply and one off-chip component for supply de-coupling. Both the input and output ports are DC de-coupled. Grounding of the amplifier is provided by plated thru-vias to the bottom of the die, no additional .
•
•
•
•
•
• 7.0
– 11.0 GHz Operating Bandwidth 1.1 dB Noise Figure 21 dB Small-Signal Gain 12 dBm Output Power +3V Single Bias Supply DC De-coupled Input and Output Ports
Datasheet v3.0
LAYOUT:
GENERAL www.DataSheet4U.com
DESCRIPTION:
The FMA219 is a 2-stage, reactively matched pHEMT low-noise MMIC amplifier designed for use over 7.0 to 11.0 GHz. The amplifier requires a single +3V supply and one off-chip component for supply de-coupling. Both the input and output ports are DC de-coupled. Grounding of the amplifier is provided by plated thru-vias to the bottom of the die, no additional gr.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | FMA2 |
Rohm |
Emitter common |
|
| 2 | FMA246 |
Filtronic Compound Semiconductors |
HIGH GAIN X-BAND MMIC AMPLIFIER |
|
| 3 | FMA2A |
Rohm |
Dual Digital Transistors |
|
| 4 | FMA1 |
Rohm |
General purpose (dual digital transistors) |
|
| 5 | FMA10A |
Rohm |
General purpose (dual digital transistors) |
|
| 6 | FMA1125DC |
Fujitsu |
Touch Sensor Controller |
|
| 7 | FMA11A |
Rohm |
Emitter common (dual digital transistors) |
|
| 8 | FMA1A |
Rohm |
General purpose (dual digital transistors) |
|
| 9 | FMA3007 |
Filtronic Compound Semiconductors |
2-20GHZ BROADBAND MMIC AMPLIFIER |
|
| 10 | FMA3008 |
Filtronic |
BROADBAND MMIC AMPLIFIER |
|
| 11 | FMA3009 |
Filtronic |
BROADBAND MMIC AMPLIFIER |
|
| 12 | FMA3011 |
Filtronic |
MMIC POWER AMPLIFIER |
|